Last week the men from SRAM showed up at the shop to wow us with some of their new wares. And wowed we were.

First up was the new RS-1, RockShox new “upside down” fork. As a former motorcycle guy, I’ve often wondered why high-end bicycle suspension forks look like old technology motorcycle suspension forks. I’m sure it has to do with varying priorities on weight, rigidity and performance. Here’s a thing you may or may not know: each leg of a motorcycle fork contains both spring and damping functions, so both legs are pretty much doing the same thing. On a bicycle suspension fork, one leg typically has the spring function and the other takes care of the damping.

RS1

While inverted forks feature less unsprung weight (that is, the weight of all parts of the machine not suspended), on a bike such a fork would require a very strong connection between the two fork legs. Rockshoxs says that this has been a real challenge — a challenge answered by the RS-1 and its integrated hub and new thru axle.

Holding the RS-1, I can attest to its light weight. The hub is very nifty with very wide flanges and a thru-axle that seems miles better than the maxle lite on my SID. All of this said, it’s an expensive little mess ($1865!), so I don’t know that I’ll be trying it soon.

The other part up for discussion involved Guide brakes, which supersede the Elixir brakes we’ve all known and partially loved for the past several years. Gone is the taperbore technology, which had a lot to do with the way Elixirs grabbed “right now,” with no large dead band. Guides go back to a more traditional master cylinder + reservoir setup, but employ new methods to close off the reservoir port quickly to eliminate the dead spot. On the RSC (which stands for Reach Adjust, Swing Link, Contact Adjust), the technology is swing link, essentially a cam that initially moves the master cylinder very quickly, then slows to allow greater modulation. Pretty sweet. Reach Adjust is, to this guy, something that’s pretty much part and parcel of any decent hydraulic brake, but thanks for including it. Contact Adjust allows you to easily get both brake levers to “hit” in the same spot.

GuideBox

One thing anyone will quickly notice about the Guides is the new rotor look. SRAM was apparently sick and tired of people complaining about the noise of their brakes (sounds like Thanksgiving!) and hired some sort of sonic witch doctor (an audiologist?) to work on the issue. Thus: bold new look.

GuideRotor

And then, much to my surprise, the brakes were installed on my Explosif, and I was asked to try them out. Can you guess what I’ve been doing today (hint: trying out brakes)?

Before the Guides, I had Magura MT6 brakes on the bike. It took me a little while to perfect the setup, largely due to the fact that I’d gone Full Cheap and tried to use the brakes with old Avid rotors that I’d had for a while. Once I got Magura rotors, pads and brakes, the system worked beautifully. I was quite pleased.

One thing that has nothing to do with braking that I liked immediately was the integration between the Guides and my shifter. While not awful, I never thought that the Magura brakes and SRAM shifters fit all that well together. Such was not the case with the Guides. The brakes and shifter looked and worked perfectly together.

MaguraRight
The old setup.
Bold new look.
Bold new look.

The first thing I noticed when riding the bike around the parking lot is how hard they hit, which I somewhat consider an Avid trait. Touch the lever: engage the brakes. Just like that. The second thing I noticed was the silence, no noise at all, almost eerie.

Before we hit the trail today I showed my buddy the new setup. His response: “You’re going over the bars.” Not at all. I was immediately comfortable and confident with the Guides. They come on very quickly, but then are very progressive and easy to modulate. One-finger braking all the way. Quiet? Oh, very. How do they stack up to the Maguras? I’d say the performance is equal, with maybe a nod to the quick bite of the Guides. The Maguras weigh less — 310 g vs. 375 g. each — but the Guides are more nicely integrated (with my SRAM stuff). One thing perhaps worth mentioning is that SRAM/Avid brakes are pretty ubiquitous in bike shops across this great land. Odds are you can get parts pretty easily. Magura, while gaining ground, is more of an odd duck, with the odds of in-stock parts and pads significantly lower.

RotorInstalled

Lastly: price. A Guide RSC will set you back $200 at each end, a long way from cheap, but not as hard to digest as (cough) $270 for the MT6. Anybody paying the least bit of attention knows that SRAM/Avid brakes have taken a few shots lately, so I didn’t really consider them when I built this bike. Still, my first ride on the Guides was great, and I look forward to having them on the bike for a long time to come.

Monkeys on Typewriters

Each month we go to the zoo and hand out typewriters to monkeys. After a few days, we collect their thoughts and format them into an email newsletter suitable for framing or birdcage lining. Sound good? Enter your email below and check it out.

Note: we will never ever ever ever share your email. Ever. No monkey will contact you directly.